Home › Bollards and Physical Barriers
We install bollards and physical barriers in Wilkes-Barre, PA to protect buildings, pedestrians, and critical equipment from vehicle impact. Our services include steel pipe bollards with concrete footings, removable posts, and low profile barriers for parking lots and loading areas. Layouts are designed to control traffic while preserving access where needed. Strengthen safety at vulnerable points around your property with purpose built barriers.
Legendary Fence Company Wilkes-Barre provides professional bollard installation throughout Wilkes-Barre, PA, Pennsylvania and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 570-487-3002 or request your free quote.
Practical protection with bollards and barriers in Wilkes-Barre
If you are looking at bollard installation or other physical barriers, you are probably trying to solve a very specific problem: stop vehicles, guide traffic, or protect people and buildings. At Legendary Fence Company Wilkes-Barre, we start by asking about the exact risk you are worried about, rather than pushing a one size fits all product. Are you trying to keep cars off a sidewalk along a busy Wilkes-Barre street, protect an overhead door at a warehouse in Hanover Township, or keep delivery vans away from a gas meter at a Parsons duplex? Each of those calls for a different layout, spacing, and bollard type.
We walk your property with you and identify the real impact zones based on how vehicles currently move. For example, in older parts of Wilkes-Barre where parking lots are tight and lanes are narrow, careless backing into masonry, gas lines, or door frames is common. In newer industrial parks near the Casey Highway, higher speeds mean more severe impacts. We look at turning radiuses, existing curbing, slopes, and drainage so the bollards and barriers work with the site instead of creating new problems like trapped snow or blocked doors.
From there, we talk you through the options: permanent, removable, or flexible bollards, and whether you need impact rated crash protection or simple parking control. This early planning step does more to control your total project cost than any other part of the process, since it keeps us from overbuilding in low risk areas and underbuilding in high risk ones.
Types of bollards and barriers we install
There is no single bollard or barrier that fits every Wilkes-Barre property. Legendary Fence Company Wilkes-Barre helps you mix and match so the site is protected, looks clean, and stays easy to use.
Steel pipe filled with concrete is the workhorse option for most commercial clients. These are the yellow bollards you see guarding loading docks, overhead doors, and fuel areas. We install them in bored holes with rebar and concrete so they are tied into the ground, not just sitting in a shallow footing. For higher security needs, like protecting bank storefronts on Market Street or pharmacy entrances, we can upgrade to thicker wall pipe, deeper embedment, and closer spacing to resist vehicle ramming.
Decorative bollards are popular in residential and mixed use areas like older Wilkes-Barre neighborhoods with brick fronts. In those cases we can either install structural steel bollards and then slide a decorative sleeve over them, or use cast iron or aluminum decorative posts where impact strength is less critical. Sleeves come in powder coated colors to match trim or branding, and they also prevent rust on the structural pipe under them.
For parking control or occasional access, we install removable or locking fold down bollards. These are useful in shared driveways, alleys behind multi family homes, or to block unauthorized parking in small downtown lots. For loading zones where large trucks need to back up safely, we often combine line striping, wheel stops, and lower profile barriers with taller bollards so drivers get both visual and physical cues.
Beyond bollards, we install low profile concrete barriers, guardrail style barriers, and welded steel barrier rails around equipment. If you have rooftop HVAC or generators on ground pads, we can design custom barrier rails that protect the equipment but still allow maintenance access.
How our bollard installation process actually works
A solid bollard installation is mostly about what you never see. At Legendary Fence Company Wilkes-Barre, we pay as much attention to what is under the surface as to the part that sticks out of the ground.
We begin with layout, marking utilities, and verifying property lines. Wilkes-Barre has plenty of older gas and water lines in unexpected locations, as well as shallow conduits feeding parking lot lights. We call in utility markings and use careful test digs where necessary so we do not damage anything or place a bollard over a utility you might need to access later.
Next, we core drill or auger precise holes in asphalt or concrete. For standard traffic protection bollards, we typically excavate 3 to 4 feet deep, sometimes deeper in soft fill soils or slopes. The hole diameter is sized so the steel pipe has enough concrete cover around it, usually at least 6 inches of concrete all around. We brace the pipes plumb and at consistent height so your line of bollards looks straight and clean.
We then add reinforcing steel and pour high strength concrete around the pipe, vibrating or rodding the mix so there are no voids. In cold months, we schedule pours for the warmest part of the day, use appropriate concrete mixes, and protect the bases from freezing so you do not end up with cracked footings. For asphalt lots, we saw cut a clean square or circle around each bollard, and after the concrete cures we patch the asphalt tight to the new base.
Once the structural portion is set, we install sleeves or apply industrial coatings and safety striping. Height and spacing are double checked against ADA guidelines and local fire code so walkways, hydrants, and emergency access are not blocked. Before we leave, we test removable or locking bollards with you, check gate clearances if we added barriers near your fence, and walk the site to be sure snow plows will be able to work around the new obstacles.
What affects cost and timeline in Wilkes-Barre
Bollard installation pricing is driven by a few specific factors, and knowing them up front helps you choose where to invest. At Legendary Fence Company Wilkes-Barre, we itemize your estimate so you can see how each decision affects cost.
Depth and difficulty of excavation are usually the biggest drivers. In parts of Wilkes-Barre built on old fill or near the river, soils can be soft and require deeper embedment or larger concrete footings. In older downtown areas we sometimes hit old foundations or thick slabs that require heavy core drilling, which adds labor time. If we can install during a broader parking lot or sidewalk project, we can often save you money by coordinating saw cutting and concrete work.
Bollard type is the next major factor. Simple steel pipe with a painted finish is the most economical. Adding heavy duty impact ratings, decorative sleeves, or removable mechanisms increases material costs. However, it is often better to spend a bit more on stronger bollards in high risk areas, such as in front of glass storefronts or near propane storage, and use lighter options where impact risk is low, such as separating sidewalk seating from parking.
Site access and phasing also affect cost and schedule. If we can close off an entire run of parking spaces for a day, the work goes quickly. In busy locations like hospital or retail entrances where closures must be phased and traffic maintained, it takes longer. We typically plan work sequences so your business can stay open, for example doing noisy core drilling early, then finishing coatings or sleeves later.
Season matters in northeastern Pennsylvania. In winter, concrete work takes more setup and protection, which can add some cost. On the other hand, many commercial clients prefer winter installations to avoid disrupting their busy season. We will talk through timing with you and explain any tradeoffs between working in cold weather and waiting for spring.
Local issues, permitting, and how to get started
Wilkes-Barre properties often have quirks that affect bollard and barrier design. Many mixed use buildings have zero lot line storefronts right at the sidewalk, basement areaways, or vault spaces under the sidewalk. Legendary Fence Company Wilkes-Barre checks for these conditions before we drill so you do not end up with a bollard footer punching into a basement or void.
For commercial and multi family projects, bollards and barriers can trigger reviews for ADA compliance, fire lane access, and zoning. We help you coordinate with the City of Wilkes-Barre or neighboring townships as needed, and we can provide simple layout drawings that show spacing, clearance to doors, and emergency access routes. If your property is in a historic area, we can suggest decorative options that meet safety needs while keeping the look consistent with surrounding architecture.
Homeowners and small business owners often ask if they really need a permit for a few bollards. The answer depends on location, depth, and whether any public sidewalks or rights of way are involved. We will tell you plainly what is required and can assist with simple permit applications or provide the information your architect or engineer needs.
When you reach out, we usually start with a phone call and photos or a quick site visit. We will talk about what you are trying to protect, where vehicles currently travel, and what issues you have had in the past, such as repeat impacts on one corner or unauthorized parking in a narrow shared drive. We then propose a layout and bollard types, give you a clear written estimate, and schedule work around your operating hours as much as possible.
Our goal is straightforward. When the job is done, you should feel that the site is safer and easier to use, not cluttered with unnecessary posts. If you are considering bollard installation or any kind of physical barrier in Wilkes-Barre or nearby communities, Legendary Fence Company Wilkes-Barre is ready to walk the site with you and design something that makes sense for how you actually use your property.
